NETGEAR WNA3100 - Wireless-N 300 USB Adapter User Manual

Wireless-N 300 USB Adapter WNA3100 User Manual
1-4
v1.0, December 2009
Then, Install Your WNA3100 v1 Adapter
You are prompted to insert your adapter:
1. Locate a USB port on your PC.
2. Insert the adapter into the USB port, or connect it with the USB cable.
Figure 1-3
Figure 1-4
Note: For best results, put the wireless adapter at least 4 feet (1 meter) away from your
router.

NETGEAR WNA3100 - Wireless-N 300 USB Adapter Specifications

General

Interface	USB 2.0
Frequency Band	2.4 GHz
Data Transfer Rate	Up to 300 Mbps
Security	WEP, WPA, WPA2
Standards	IEEE 802.11b/g/n
Antenna	Internal
Operating Systems Supported	Windows XP, Vista, 7
Wireless Type	802.11b/g/n