NETGEAR WNA3100 - Wireless-N 300 USB Adapter User Manual

vii
v1.0, December 2009
About This Manual
The NETGEAR
®
Wireless-N 300 USB Adapter WNA3100 User Manual describes how to install,
configure, and troubleshoot the Wireless-N 300 USB Adapter WNA3100.
Conventions, Formats, and Scope
The conventions, formats, and scope of this manual are described in the following paragraphs:
• Typographical conventions. This manual uses the following typographical conventions::
• Formats. This manual uses the following formats to highlight special messages:
• Scope. This manual is written for the Wireless-N USB Adapter. For more information about
network, Internet, firewall, and VPN technologies, click the links to the NETGEAR website in
Appendix B, “Related Documents.”
Italic Emphasis, books, CDs
Bold User input, screen text
Fixed Command prompt, CLI text, code
italic URL links
Note: This format is used to highlight information of importance or special interest.
Tip: This format is used to highlight a procedure that will save time or resources.
Note: Product updates are available on the NETGEAR, Inc. website at
http://kbserver.netgear.com/products/WNA3100 v1.asp.

NETGEAR WNA3100 - Wireless-N 300 USB Adapter Specifications

General

Interface	USB 2.0
Frequency Band	2.4 GHz
Data Transfer Rate	Up to 300 Mbps
Security	WEP, WPA, WPA2
Standards	IEEE 802.11b/g/n
Antenna	Internal
Operating Systems Supported	Windows XP, Vista, 7
Wireless Type	802.11b/g/n