Advanced Settings
105
N900 Wireless Dual Band Gigabit Router WNDR4500
Remote Management
The remote management feature lets you upgrade or check the status of your N900 Wireless
Dual Band Gigabit Router over the Internet.
To set up remote management:
1. Select Advanced > Adva
nced Setup > Remote Management.
Note: Be sure to change the router’s default login password to a very secure
password. The ideal password should contain no dictionary words from any
language and contain uppercase and lowercase letters, numbers, and
symbols. It can be up to 30 characters.
2. Select the T
urn Remote Management On check box.
3. Under Allow Remote Access By, specify the external IP ad
dresses to be allowed to access
the router’s remote management.
Note: For enhanced security, restrict access to as few external IP addresses
as
p
ractical.
• To allow access from a single IP a
ddress on the Internet, select Only This Computer.
Enter the IP address that will be allowed access.
• To allow access from a range of IP addresses on the Internet, select IP Addres
s
Range. Enter a beginning and ending IP address to define the allowed range.
• To allow access from any IP address on the Internet, select Everyone.
4. Specify the port number for accessing the management interface.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
