NETGEAR WNDR4500

Administration
74
N900 Wireless Dual Band Gigabit Router WNDR4500
Wireless Settings (2.4 GHz and 5 GHz)
The following settings are displayed:
Name (SSID). The wirele
ss network name (SSID) used by the router. The default names for
the 5 GHz ends in -5G to distinguish it from the 2.4 GHz network.
Region. The geographic region where the router is being used. It might be illegal to use the
wireless feature
s of the router in some parts of the world.
Channel. Identifies the operating channel of the wireless port being used. The default
cha
nnel is Auto. When Auto is selected, the router will find the best operating channel
available. If you notice interference from nearby devices, you can select a different channel.
Channels 1, 6, and 11 will not interfere with each other.
Mode. Indicates the
wireless communication mode: Up to 54 Mbps, Up to 217 Mbps
(default), and Up to 450 Mbps.
Wireless AP. Ind
i
cates whether the radio feature of the router is enabled. If this feature is not
enabled, the Wireless LED on the front panel is off.
Broadcast Name. Ind
i
cates whether the router is broadcasting its SSID.
Wireless Isolation. Select this check
box only if you want to prevent wireless connections to
the router.
Wi-Fi Protected Setup. Ind
i
cates whether Wi-Fi Protected Setup is configured for this
network.