Administration
78
N900 Wireless Dual Band Gigabit Router WNDR4500
Erase
Under some circumstances (for example, if you move the router to a different network or if
you have forgotten the password), you might want to erase the configuration and restore the
factory default settings.
You can either use the Restore Factory Settings button on the back of the router (see Factory
Settings o
n page 120), or you can click the Erase button in this screen.
Erase sets the user name to admin, the password
to password, and the LAN IP address to
192.168.1.1, and enables the router’s DHCP.
To Next Page
Loading...
