Administration
85
N900 Wireless Dual Band Gigabit Router WNDR4500
Change the Partition Scheme
To run with the router, the partition scheme on your Mac has to be set to either GUID or MBR.
To make sure the partition scheme is set to one of these supported schemes:
1. Open the Disk Utility and select your USB drive.
2. Select the Partition ta
b.
3. Select Vo
lume Scheme and set the number of partitions you would like to use.
4. Click Options, and the Partition options appear.
5. Select GUID
Partition Table or Master Boot Record (MBR).
6. Click OK.
To Next Page
Loading...
