USB Storage
51
N900 Wireless Dual Band Gigabit Router WNDR4500
To set up approved USB devices:
1. Select Advanced > Advanced Setup > USB Settings. The following screen
displays:
2. Click the Approved Devices button. The USB Drive Approved Devices screen displays:
This screen shows the approved USB devices and the available USB devices. You can
remove or add approved USB devices.
3. To add an approved USB device, select it from the Available USB Devices list, and then click
Add.
4. Select the Allo
w only approved devices check box.
5. Click Appl
y so that your change takes effect.
To Next Page
Loading...
