ReadySHARE Printer
68
N900 Wireless Dual Band Gigabit Router WNDR4500v2
Control Center Configuration
Select Tools > Configuration to display the following screen:
Automatically execute when logging on Windows. Enable this utility to start automatically
when you are logged in to Windows.
Timeout. Specify the time-out value for holding the USB resource when it is not in use.
Language. Select the display language for this utility
.
USB Printer
The first time you use a printer, you need to click Connect. You might be asked to install the
driver for this printer. After the driver is installed, the printer status changes to Available.
Note: Some USB printers (for example, HP and Lexmark printers) request
that you do not connect the USB cable until you are prompted by the
their installation software.
If the USB printer is detected and connected automatically, you need to disconnect the printer
and wait for the prompt asking you to click Connect.
To Next Page
Loading...
Need help?
General
