NETGEAR genie Advanced Home
33
N900 Wireless Dual Band Gigabit Router WNDR4500v2
Within 2 minutes, go to the client device and use its WPS software to join the network
without entering a password.
The router attempts to add the WPS-capable device. The WPS LED on the front of
the router blinks green. When the router establishes a WPS connection, the LED is solid
green, and the router WPS screen displays a confirmation message.
4. Repeat Step 2 and Step 3 to add another WPS client to your network.
Setup Menu
Select Advanced > Setup to display the Setup menu. The following selections are available:
• Internet Setup.
Access the same Internet Setup screen that you can access from the
dashboard on the Basic Home screen. See Internet Setup on page 21.
• W
ireless Setup. Access the same Wireless Settings screen that you can access from
the dashboard on the Basic Home screen. See Basic Wireless Settings on page 25.
• Guest Network.
Access the same Guest Network screen that you can access from the
dashboard on the Basic Home screen. See Guest Networks on page 28.
• W
AN Setup. Internet (WAN) setup. See WAN Setup on page 34.
• LAN Setup. Local area network (LAN) setup. See LAN Setup on page 37.
• QoS Setup. Quality of Service (QoS) setup. See Quality of Service (QoS) Setup on
page 40.
To Next Page
Loading...
Need help?
General
