Advanced Settings
98
N900 Wireless Dual Band Gigabit Router WNDR4500v2
Port Forwarding is selected as the service type.
2. From the Service Name list, select the service or game that you will host on your network. If
the service does not appear in the list, see Add a Custom Service on page 98.
3. In the corresponding Server IP
Address field, enter the last digit of the IP address of your
local computer that will provide this service.
4. Click Add.
The service appears in the list in the screen.
Add a Custom Service
To define a service, game, or application that does not appear in the Service Name list, you
have to first determine which port number or range of numbers the application uses. You can
usually determine this information by contacting the publisher of the application or user
groups or newsgroups.
To add a custom service:
1. Select Advanced >
Advanced Setup > Port Forwarding/Port Triggering.
2. Select Port Forwarding as the service type.
3. Click the Add Custom Service button:
4. In the Service Name field, enter a descriptive name.
5. In the Service
Type list, select the protocol. If you are unsure, select TCP/UDP.
6. In the Starting Port field, enter the beginning port number
.
• If the application uses a single port, enter the same port number in the Ending Port
field.
• If the application uses a range of ports, enter the ending port number of the range in
the Ending Port field.
To Next Page
Loading...
Need help?
General
