Administration
81
N900 Wireless Dual Band Gigabit Router WNDR4500v2
Wireless Settings (2.4 GHz and 5 GHz)
The following settings are displayed:
Name (SSID).
The wireless network name (SSID) used by the router. The default names for
the 5-GHz network ends in -5G to distinguish it from the 2.4-GHz network.
Region. The geographic region where the router is being used. It might be illegal to use the
wireless features of the router in some parts of the world.
Channel. The operating channel of the wireless port being used. The default channel is Auto.
When Auto is selected, the router selects the best operating channel available. If you notice
interference from nearby devices, you can select a different channel. Channels 1, 6, and
11do not interfere with each other.
Mode.
The wireless communication mode: Up to 54 Mbps, Up to 217 Mbps (default), and Up
to 450 Mbps.
Wireless AP. Indicates whether the radio feature of the router is enabled. If this feature is not
enabled, the Wireless LED on the front panel is off.
Broadcast Name. Indicates whether the router is broadcasting its SSID.
Wireless Isolation. Select this check box only if you want to prevent wireless connections to
the router.
Wi-Fi Protected Setup. Indicates whether Wi-Fi Protected Setup is configured for this
network.
To Next Page
Loading...
Need help?
General
