Advanced Settings
108
N900 Wireless Dual Band Gigabit Router WNDR4500v2
IPv6
You can use this feature to set up an IPv6 Internet connection type if NETGEAR genie does
not detect it automatically.
To set up an IPv6 Internet connection type:
1. Select Advanced >
Advanced Setup > IPv6 to display the following screen:
2. Select the IPv6 connection type from the list. Your Internet service provider (ISP) can provide
this information.
• If your ISP did not provide details, you can select IPv6 T
unnel.
• If you are not sure, select Auto Detect so that the router detects the IPv6 type that is
in use.
• If your Internet connection does not use PPPoE, DHCP
, or fixed, but is IPv6, then
select IPv6 auto config.
3. Click Apply so that your changes take ef
fect.
To Next Page
Loading...
Need help?
General
