Advanced Settings
105
N900 Wireless Dual Band Gigabit Router WNDR4500v2
Remote Management
The remote management feature lets you upgrade or check the status of your router over the
Internet.
To set up remote management:
1. Select Advanced >
Advanced Setup > Remote Management.
Note: Be sure to change the router’s default login password to a very secure
password. The ideal password should contain no dictionary words from any
language and contain uppercase and lowercase letters, numbers, and
symbols. It can be up to 30 characters.
2. Select the T
urn Remote Management On check box.
3. Under
Allow Remote Access By, specify the external IP addresses that are allowed to
access the router’s remote management.
Note: For enhanced security, restrict access to as few external IP addresses
as practical.
• T
o allow access from a single IP address on the Internet, select Only This Computer.
Enter the IP address.
• T
o allow access from a range of IP addresses on the Internet, select IP Address
Range. Enter a beginning and ending IP address to define the allowed range.
• T
o allow access from any IP address on the Internet, select Everyone.
4. Specify the port number for accessing the management interface.
To Next Page
Loading...
Need help?
General
