NETGEAR XAU2511 User Manual

Getting Started
12
Powerline Music Extender XAU2511
Use the Security Button to Set the Encryption Key
Note: A Powerline device can generate a private key only once. If you
want to replace a private key, first reset the Powerline devices to
their factory settings. To do this either press the Reset button for 1
second, then release, or use the NETGEAR genie factory defaults
feature (see Reset a Device to Factory Settings on page 34).
You can use the Security button to change the default encryption key and set a private
encryption key inste
ad. The default encryption key is HomePlugAV.
 To set the encryption key:
1. Make su
re that all of the Powerline devices that you want to configure are plugged in.
Verify that the Power and Powerline LEDs on each device are lit solid green.
CAUTION:
Do not press the Security button on the Powerline device until the Power
and Powerline LEDs on each Powerline device in your network are lit solid
green. Pressing the Security button too soon can temporarily disable
Powerline communication. If this should occur, reset the Powerline device
to its factory default settings (press the Reset button for 1 second, then
release).

NETGEAR XAU2511 Specifications

General

Brand	NETGEAR
Model	XAU2511
Category	Extender
Language	English