XAV101 Powerline AV Ethernet Adapter User Guide
Using the XAV101 Configuration Utility 2-5
v1.0, April 2008
2. On the XAV101 Configuration Utility Main tab, click the device name for a remote Powerline
device to highlight it, then click Firmware Upgrade. The following screen is displayed:
3. Click the Browse button, and locate the firmware file that you saved on your computer. The
file has an extension of .bin.
4. Select the downloaded firmware file, and then click Upgrade.
5. Repeat the previous steps to remotely upgrade firmware for all Powerline AV Ethernet
Adapters in your network.
Resetting to Factory Defaults
This option returns the network encryption key to its default value of HomePlugAV. Only one
device at a time can be reset.
Figure 2-5
Warning: Do not try to go online, shut down the computer, or either disconnect or
unplug Powerline AV Ethernet Adapters, until the firmware upgrade
finishes!
Note: If you customized your network encryption key, the local Powerline device will be
disconnected from the network when you reset it to the factory default. To avoid
this problem, reset all remote devices before you reset the local device.
To Next Page
Loading...
Need help?
General