XAV101 Powerline AV Ethernet Adapter User Guide
Using the XAV101 Configuration Utility 2-9
v1.0, April 2008
3. Click the Security tab.
4. Select the check box next to the Device Name column, for the device marked as Local in the
Location column.
5. Type the network encryption key into the Apply the Encryption Key setting field, and click
Set Selected Devices.
6. Select the Main tab, and click Scan. Check that the devices in the Powerline network appear in
the device list. It may take a minute or two for all devices in the network to be detected.
Adding a Device from a Remotely Connected Computer
If you are using a custom network encryption key, first, set all the devices to the default network
encryption key of HomePlugAV so that they can communicate with each other. Then set all the
devices to the network encryption key that you want to use.
Returning to the Default Network Encryption Key
Follow these steps:
1. Plug the new device into an AC power outlet.
Figure 2-9
To Next Page
Loading...
Need help?
General