NETGEAR XS708T Hardware Installation Guide

Table 1. LEDs on model XS708T switch (Continued)
DescriptionLED
10G LED:
• Off: No SFP+ module link is established.
• Solid. A valid 10 Gbps link is established.
• Blinking.The SFP fiber port is transmitting or receiving
packets at 10 Gbps.
Speed and ACT
LEDs for SFP+
slots 7F and 8F
1G LED
• Off. No SFP+ module link is established.
• Solid. A valid 1 Gbps link is established.
• Blinking.The module is transmitting or receiving packets
at 1 Gbps.
Hardware Overview Model XS712Tv2
The following sections describe the physical characteristics of model XS712Tv2.
Front Panel Model XS712Tv2
The switch provides twelve 100M/1G/10G copper RJ-45 ports, of which port 11T and slot 11F form one
combo port and port 12T and slot 12F form another combo port.The 1G and 10G SFP+ slots (11F and 12F)
accept copper or fiber modules.You use either port 11T or port 11F, and similarly, either port 12T or port
12F. Each copper RJ-45 port is capable of sensing the line speed and negotiating the duplex mode with the
link partner automatically.
The following figure shows the front panel of the model XS712Tv2.
Figure 3. Front panel model XS712Tv2
DescriptionNumber
Power and Fan LEDs.1
Recessed Reset button to restart the device.2
Recessed Factory Defaults button to restore the device back to the factory defaults.3
Hardware Overview
13
8-Port, 12-Port, and 16-Port Gigabit Smart Managed Pro Switch

NETGEAR XS708T Specifications

General

Switch type	Managed
Switch layer	L2+/L3
Quality of Service (QoS) support	Yes
USB 2.0 ports quantity	1
SFP+ module slots quantity	2
Installed SFP modules quantity	-
Basic switching RJ-45 Ethernet ports type	10G Ethernet (100/1000/10000)
Basic switching RJ-45 Ethernet ports quantity	8
Certification	CE, FCC Cl. A, VCCI Cl. A, Cl. A EN 55022 (CISPR 22), Cl. A C-Tick, EN 55024, CCC
Product color	Black
LED indicators	Activity, Link, Power
Number of fans	1 fan(s)
Number of VLANs	256
Networking standards	IEEE 802.1D, IEEE 802.1Q, IEEE 802.1ab, IEEE 802.1p, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3, IEEE 802.3ad, IEEE 802.3ae, IEEE 802.3an, IEEE 802.3az, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z
Virtual LAN features	Private VLAN, Protocol-based VLAN
Cable types supported	Cat5e, Cat6, Cat6a, Cat7
Copper ethernet cabling technology	10GBASE-T
Noise level	29.1 dB
Flash memory	256 MB
Internal memory	512 MB
Processor frequency	600 MHz
Mean time between failures (MTBF)	276832 h
Jumbo frames	9000
Latency (10 Gbps)	3.012 µs
MAC address table	16000 entries
Packet buffer memory	2 MB
Number of static routes	32
DHCP features	DHCP server, DHCP client
Security algorithms	802.1x RADIUS
Access Control List (ACL) rules	100
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (max)	96 W
Operating altitude	0 - 3000 m
Operating temperature (T-T)	0 - 50 °C
Operating relative humidity (H-H)	0 - 90 %
Cables included	AC

Weight and Dimensions

Depth	204 mm
Width	440 mm
Height	43 mm
Weight	2980 g