NETGEAR XS708T Hardware Installation Guide

1
Introduction
This hardware installation guide is for the following NETGEAR Smart Managed Pro Switches:
• Model XS708T 8-Port 10-Gigabit Smart Managed Pro Switch
• Model XS712Tv2 12-Port 10-Gigabit Smart Managed Pro Switch
• Model XS716T 16-Port 10-Gigabit Smart Managed Pro Switch
These models provide eight, twelve, or sixteen 100/1000/10GBASE-T RJ-45 copper ports, two of which are
combo ports that can accept SFP+ 1G and 10G copper or fiber optical modules.
In this hardware installation guide, except where indicated otherwise, these models are referred to as the switch.
This hardware installation guide complements the installation guide that came with the switch.
The chapter includes the following sections:
• Overview
• Features
• Safety Instructions and Warnings
For more information about the topics that are covered in this manual, visit the support
website at support.netgear.com.
Note
For detailed technical specifications and information about supported features, see the
datasheet at netgear.com/business/products/switches/smart/.
Note
For software and configuration documentation, see the links on the resource CD in the product
package or visit downloadcenter.netgear.com.
Note
5

NETGEAR XS708T Specifications

General

Switch type	Managed
Switch layer	L2+/L3
Quality of Service (QoS) support	Yes
USB 2.0 ports quantity	1
SFP+ module slots quantity	2
Installed SFP modules quantity	-
Basic switching RJ-45 Ethernet ports type	10G Ethernet (100/1000/10000)
Basic switching RJ-45 Ethernet ports quantity	8
Certification	CE, FCC Cl. A, VCCI Cl. A, Cl. A EN 55022 (CISPR 22), Cl. A C-Tick, EN 55024, CCC
Product color	Black
LED indicators	Activity, Link, Power
Number of fans	1 fan(s)
Number of VLANs	256
Networking standards	IEEE 802.1D, IEEE 802.1Q, IEEE 802.1ab, IEEE 802.1p, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3, IEEE 802.3ad, IEEE 802.3ae, IEEE 802.3an, IEEE 802.3az, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z
Virtual LAN features	Private VLAN, Protocol-based VLAN
Cable types supported	Cat5e, Cat6, Cat6a, Cat7
Copper ethernet cabling technology	10GBASE-T
Noise level	29.1 dB
Flash memory	256 MB
Internal memory	512 MB
Processor frequency	600 MHz
Mean time between failures (MTBF)	276832 h
Jumbo frames	9000
Latency (10 Gbps)	3.012 µs
MAC address table	16000 entries
Packet buffer memory	2 MB
Number of static routes	32
DHCP features	DHCP server, DHCP client
Security algorithms	802.1x RADIUS
Access Control List (ACL) rules	100
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (max)	96 W
Operating altitude	0 - 3000 m
Operating temperature (T-T)	0 - 50 °C
Operating relative humidity (H-H)	0 - 90 %
Cables included	AC

Weight and Dimensions

Depth	204 mm
Width	440 mm
Height	43 mm
Weight	2980 g