Register Your Product
Registering your product allows you to receive email alerts and streamlines the technical support process.
To register your product:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired network connection.
You must access the switch while connected to the network (on-network) to register
the switch.
Note
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
The login page displays.
4. Enter the switch password.
The default password is password. The password is case-sensitive.
The Switch Information page displays.
5. Select Help > Registration.
The Product Registration page displays.
6. Click the Register button.
7. Follow the onscreen process to register your product.
Install and Access the Switch in Your Network
23
12- or 24-Port 10-Gigabit/Multi-Gigabit Switch Models XS512EM and XS724EM
To Next Page
Loading...
