The Switch Information page displays.
5. Select System > LAG > LACP Configuration.
The LACP Configuration page displays.
6. In the LACP System Priority field, enter a number from 1 to 65535.
The default is 32768.
7. Click the Apply button.
Your settings are saved.
Set Up LACP Port Priority and Time-Out Values
You can set the LACP port priority value and LACP time-out value for a port. By default, the LACP port
priority value for a port is 128 and the time-out value is Long.
To specify LACP port priority value and LACP time-out value for a port:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired network connection, or connect directly to a switch that is off-network using
an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
The login page displays.
4. Enter the switch password.
The default password is password. The password is case-sensitive.
The Switch Information page displays.
5. Select System > LAG > LACP Port Configuration.
The LACP Port Configuration page displays.
6. Select one or more ports.
7. In the LACP Priority field, enter a new value.
You can enter a value from 1 to 65535. A higher value indicates a lower priority. The default value is
128.
8. In the Timeout menu, select the time-out value.
The default value is Long.The other option is Short.
9. Click the Apply button.
Your settings are saved.
Manage Network Settings
49
12- or 24-Port 10-Gigabit/Multi-Gigabit Switch Models XS512EM and XS724EM
To Next Page
Loading...
