NETGEAR XS724EM

To manage UPnP:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired network connection, or connect directly to a switch that is off-network using
an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
The login page displays.
4. Enter the switch password.
The default password is password. The password is case-sensitive.
The Switch Information page displays.
5. Select System > Management > Discovery and Management.
The Discovery and Management page displays.
6. In the UPnP section, select one of the following radio buttons:
• Disable. UPnP is disabled.
• Enable. UPnP is enabled.This is the default setting.
7. Click the Apply button.
Your settings are saved.
Manage Bonjour
A Mac OS device that supports Bonjour can discover the switch in the network so that you can find the
switch IP address and log in to the local browser interface of the switch. Bonjour is enabled by default.You
can disable Bonjour for security reasons.
On a Mac OS device that does not support Bonjour, use the Mozilla Firefox browser
with the Ciaociao plug-in to discover the switch in the network.
Note
To manage Bonjour:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired network connection, or connect directly to a switch that is off-network using
an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
The login page displays.
4. Enter the switch password.
The default password is password. The password is case-sensitive.
Manage Network Settings
42
12- or 24-Port 10-Gigabit/Multi-Gigabit Switch Models XS512EM and XS724EM