3. Download the firmware to your computer.
4. Read the new firmware release notes to find out if you must reconfigure the switch after upgrading.
5. Connect your computer to the same network as the switch.
You can use a WiFi or wired network connection, or connect directly to a switch that is off-network using
an Ethernet cable.
6. Launch a web browser.
7. In the address field of your web browser, enter the IP address of the switch.
The login page displays.
8. Enter the switch password.
The default password is password. The password is case-sensitive.
The Switch Information page displays.
9. Select System > Maintenance > Firmware Update.
The Firmware Update page displays.
10. Click the Browse button and locate and select the new firmware image file.
11. Click the Apply button.
WARNING:
To avoid the risk of corrupting the firmware, do not interrupt the update. For
example, do not turn off the switch or disconnect it.
When the update is complete, your switch restarts.The update process typically takes about three
minutes.
Restart the Switch
You can restart the switch remotely.
To restart the switch:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired network connection, or connect directly to a switch that is off-network using
an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
The login page displays.
4. Enter the switch password.
The default password is password. The password is case-sensitive.
The Switch Information page displays.
Manage and Monitor the Switch
54
12- or 24-Port 10-Gigabit/Multi-Gigabit Switch Models XS512EM and XS724EM
To Next Page
Loading...
