3. In the address field of your web browser, enter the IP address of the switch.
The login page displays.
4. Enter the switch password.
The default password is password. The password is case-sensitive.
The Switch Information page displays.
5. Select System > Maintenance > Restore Configuration.
The Restore Configuration page displays.
6. Click the Browse button and locate and select the saved configuration file (a .cfg file).
7. Click the Apply button.
The saved configuration is restored to the switch.
Return the Switch to Its Factory Default Settings
Under some circumstances (for example, if you lost track of the changes that you made to the switch settings
or you move the switch to a different network), you might want to erase the configuration and reset the
switch to factory default settings.
To reset the switch to factory default settings, you can either use the Factory Defaults button on the front
panel of the switch or use the reset function in the local browser interface. However, if you changed and
lost the password and cannot access the switch, you must use the Factory Defaults button.
After you reset the switch to factory default settings, the password is password and the switch’s DHCP client
is enabled. For more information, see Factory Default Settings on page 65.
Use the Factory Defaults Button to Reset the Switch
You can use the Factory Defaults button to reset the switch to its factory default settings.
CAUTION:
This process erases all settings that you configured on the switch.
To reset the switch to factory default settings using the Factory Defaults button:
1. On the front panel of the switch, locate the recessed Factory Defaults button.
2. Using a straightened paper clip, press and hold the Factory Defaults button for four seconds.
3. Release the Factory Defaults button.
The configuration is reset to factory default settings. When the reset is complete, the switch restarts.
This process takes about one minute.
Manage and Monitor the Switch
56
12- or 24-Port 10-Gigabit/Multi-Gigabit Switch Models XS512EM and XS724EM
To Next Page
Loading...
