6. If this is the first time that you are accessing the Basic 802.1Q VLAN Status page or if you are changing
the VLAN assignment method, select the Enable radio button and continue with Step 7.
Otherwise, see Step 9.
A pop-up window opens, informing you that the current VLAN settings will be lost.
7. Click the OK button.
The pop-up window closes.
8. Click the Apply button.
Your settings are saved.
The Basic 802.1Q VLAN Identifier table displays.
9. Under each port to be added to a VLAN, enter the ID of the VLAN.
You can enter a VLAN ID from 1 to 4093. If all the VLANs share an uplink to the Internet or servers,
enter all in the VLAN ID field for the port that you want to use for the uplink.
If ports are members of the same LAG, you must assign them to the same VLAN.Note
10. Click the Apply button.
Your settings are saved.
Create 802.1Q-Based VLANs in an Advanced Configuration
In an advanced 802.1Q-based VLAN configuration, you can assign ports on the switch to a VLAN with an
ID number in the range of 1–4093 and you can add tagged or untagged ports to a VLAN. In addition, you
can use port VLAN IDs (PVIDs). By default, all ports are untagged members of VLAN 1.
To create 802.1Q-based VLANs in an advanced configuration:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired network connection, or connect directly to a switch that is off-network using
an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
The login page displays.
4. Enter the switch password.
The default password is password. The password is case-sensitive.
The Switch Information page displays.
5. Select VLAN > 802.1Q > Advanced > VLAN Configuration.
The Advanced 802.1Q VLAN Status page displays.
6. If this is the first time that you are accessing the Advanced 802.1Q VLAN Status page or if you are
changing the VLAN assignment method, select the Enable radio button and continue with Step 7.
Use VLANS for Traffic Segmentation
28
12- or 24-Port 10-Gigabit/Multi-Gigabit Switch Models XS512EM and XS724EM
To Next Page
Loading...
