NETGEAR XS724EM

Set Up Rate Limiting............................................................................................36
Set Up Broadcast Filtering...................................................................................37
Chapter 5 Manage Network Settings
Specify IP Address Settings for the Switch..........................................................40
Use the Local Browser Interface to Specify the Switch IP Address................40
Use the ProSAFE Plus Utility to Specify the Switch IP Address.....................40
Manage Switch Discovery Protocols....................................................................41
Manage Universal Plug and Play....................................................................41
Manage Bonjour..............................................................................................42
Manage NETGEAR Switch Discovery Protocol..............................................43
Manage Multicast Traffic With IGMP Snooping....................................................44
Customize IGMP Snooping.............................................................................44
Specify a VLAN for IGMP Snooping................................................................45
Set Up Link Aggregation......................................................................................46
Set Up a Static Link Aggregation Group.........................................................46
Set Up a Link Aggregation Control Protocol Group.........................................47
Set Up the LACP System Priority for the Switch.............................................48
Set Up LACP Port Priority and Time-Out Values.............................................49
Chapter 6 Manage and Monitor the Switch
Manage Flow Control...........................................................................................51
Manage the Port Speed and the Port Status.......................................................51
Enable Loop Prevention.......................................................................................52
Manage the Power Saving Mode.........................................................................53
Manually Download and Update the Firmware....................................................53
Restart the Switch................................................................................................54
Save the Switch Configuration.............................................................................55
Restore a Saved Switch Configuration................................................................55
Return the Switch to Its Factory Default Settings.................................................56
Use the Factory Defaults Button to Reset the Switch.....................................56
Use the Local Browser Interface to Reset the Switch.....................................57
Enable Port Mirroring...........................................................................................58
View Switch Information or Change the Switch Device Name.............................59
View or Clear the Port Statistics...........................................................................59
Chapter 7 Diagnostics and Troubleshooting
Test Cable Connections.......................................................................................62
Resolve a Subnet Conflict to Access the Switch..................................................62
Hardware Troubleshooting Chart.........................................................................63
Appendix A Factory Default Settings and Technical Specifications
Factory Default Settings.......................................................................................65
Basic Technical Specifications.............................................................................66
Appendix B Install the Switch in a Rack
4
12- or 24-Port 10-Gigabit/Multi-Gigabit Switch Models XS512EM and XS724EM