Address, Port, Username, and Password fields
appear. Touch each field to open a pop-up
keyboard and enter the appropriate data. Touch
OK to save your entries.
Targets
You can add an unlimited number of test targets
by entering the IP address or a URL and specifying
either an ICMP Ping or TCP Port Open test for
each target.
Address: When AutoTest runs, the LinkRunner
G2 attempts to reach the target address entered in
this field. The default is Google.com.
l Touch the Address field to open a pop-up
keyboard and enter a new address.
l Touch the action overflow icon to the right
of the Address field to either Delete the tar-
get address field from AutoTest or Duplic-
ate the current target address entry.
Port: This is the port the LinkRunner G2 uses to
connect to the target address for a TCP Port Open
test. The default is 80. Touch the Port field to open
a pop-up number pad and enter a new port
number. Touch OK to save it.
38
LinkRunner G2 Application Settings
To Next Page
Loading...
