(11)
*Normal Mode Store Mode
Output Stored Data Output Total Entry
Clear Memory
$LAN#TK
Turkey Q keyboard
$LAN#TF
Turkey F keyboard
If you are heading for a working area which lies outside the Bluetooth signal
range, you may activate scanner’s store mode, following step described below.
Under this mode, all scanned data will be stored directly into buffer memory of
the device. Furthermore, data entries will be permanently saved in the buffer
memory prior to the manual upload into the working station, so that you may
upload them when you are near your working device.
Working Mode
To Next Page
Loading...
Need help?
General
