(7)
Basic Mode (HID) *
• NO software installation needed
• Connects to most devices
• Scanner interacts with host device like a keyboard
Important Notes:
If you want to shift from HID to SPP or BLE just scan the Corresponding
command barcode. If you want to shift from SPP or BLE to HID mode, ignore
(or delete) "E Barcode Scanner"→ turn off bluetooth→ scan Basic Mode
(HID)→ Open the bluetooth → re-pair it.
Applicatin Mode (Apple Speci�ic Serial Pro�ile)
• For iOS Devices
• If you have an iOS application that supports our Scanners this is the
mode to use.
Application Mode (Serial Port Pro�ile)
• For Android or Windows
• Software installation is required.
• If you have an application that supports this is the mode recommended.
AT+MODE=2
AT+MODE=3
AT+MODE=1
To Next Page
Loading...
