Neural DSP Nano Cortex - Capture Volume

Capture Volume
Press-and-hold CAPTURE for 2 seconds to enter Capture Volume Mode.
In this mode, the CAPTURE and LEVEL LED rings blink slowly.
LEVEL KNOB BEHAVIOR
Turn the LEVEL knob to control the output volume of the Capture in the signal chain from
-24dB to +12dB (0.0dB by default).
09.10.2024, 12:56
Nano Cortex® User Manual 1.1.0 - Neural DSP
https://neuraldsp.com/manual/nano-cortex?srsltid=AfmBOops0eFs2xr0dG55hFwinvMw8i88HM5lKcahmGHGNS8iiX-En5BK
32/105