Host Monitoring
D.I. and processed signal recording
Nano Cortex allows you to record dry and processed signals simultaneously. Connect your
instrument to INPUT and ensure Nano Cortex is selected as the default audio interface on your
computer.
1
Open your DAW, create a mono audio track, and set its input as Input 1 (Dry input signal).
2
Create a stereo audio track and set its input as Input 3/4 (Processed signal from analog
OUTPUT 1L and 2R).
3
Arm both tracks for recording.
4
To reamp a recorded D.I. track, set its output as Output 3 (To Nano Cortex's INPUT),
create a new stereo track (Input 3/4), and arm it for recording.
Connecting Nano Cortex to an iPhone® or iPad®
To Next Page
Loading...
