84
TRIGOUTFREQ
Trigger Out Frequency Select
Syntax: TRIGOUTFREQ <freq>
Parameters:
The parameter <freq> is of type <number>. The range of this number is 0.001
to 1000Hz.
Function:
This command is used to set the frequency at which a pulse is output, on the
TTL OUT line, in trigger out frequency mode.
Related Commands: TRIGOUT, TRIGOUT?, TRIGOUTFREQ?, TRIGOUTINTG,
TRIGOUTINTG?, TRIGOUTLVL, TRIGOUTLVL?, TRIGOUTPOL, TRIGOUTPOL?
TRIGOUTFREQ?
Trigger Out Frequency Query
Syntax: TRIGOUTFREQ?
Parameters: None
Function:
This query returns the trigger out pulse frequency used during trigger out
frequency mode.
Returns: <freq>
<freq> is of type <number> in exponent notation with units of hertz.
Related Commands: TRIGOUT, TRIGOUT?, TRIGOUTFREQ, TRIGOUTINTG,
TRIGOUTINTG?, TRIGOUTLVL, TRIGOUTLVL?, TRIGOUTPOL, TRIGOUTPOL?
TRIGOUTINTG
Trigger Out Integration Level Select
Syntax: TRIGOUTINTG <level>
Parameters:
The parameter <level> is of type <number> which specifies an integration
energy level in joules.
Function:
This command is used to set the integration energy level at which the trigger
out will become inactive if using the trigger out in integration mode.
Related Commands: TRIGOUT, TRIGOUT?, TRIGOUTFREQ, TRIGOUTFREQ?,
TRIGOUTINTG, TRIGOUTLVL, TRIGOUTLVL?, TRIGOUTPOL, TRIGOUTPOL?
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
