Newport 2835-C - Device Independent Commands

46
SFREQ DC Sample Frequency Select
SFREQ? DC Sample Frequency Query
SPREC DC Sample Type Select
SPREC? DC Sample Type Query
STMAX_n? Statistics Buffer Maximum Value Query
STMEAN_n? Statistics Buffer Mean Value Query
STMIN_n? Statistics Buffer Minimum Value Query
STMXMN_n? Statistics Buffer Maximum-Minimum Value Query
STSDEV_n? Statistics Buffer Standard Deviation Query
STSIZE_n Statistics Buffer Size Select
STSIZE_n? Statistics Buffer Size Query
STOP Stop Both Channel Acquisition
STOP_n Stop Single Channel Acquisition
STOREF_n Store Reference Reading
STOREF_n? Store Reference Query Reading
STOZERO_n Store Zero Signal
TONE Tone Enable
TONE? Tone Enable Query
TRIGOUT Trigger Out Mode Select
TRIGOUT? Trigger Out Mode Query
TRIGOUTFREQ Trigger Out Frequency Select
TRIGOUTFREQ? Trigger Out Frequency Query
TRIGOUTINTG Trigger Out Integration Level Select
TRIGOUTINTG? Trigger Out Integration Level Query
TRIGOUTLVL Trigger Out Level Select
TRIGOUTLVL? Trigger Out Level Query
TRIGOUTPOL Trigger Out Polarity Select
TRIGOUTPOL? Trigger Out Polarity Query
UNITS_n Units Select
UNITS_n? Units Query
USRCAL_n User Calibration Enable
USRCAL_n? User Calibration Enable Query
USRREF_n User Defined Reference Value Select
USRREF_n? User Defined Reference Value Query
USRRESP_n User Responsivity Factor Select
USRRESP_n? User Responsivity Factor Query
ZERO_n Signal Zeroing Enable
ZERO_n? Signal Zeroing Enable Query
ZEROVAL_n? Zero Signal Query
NOTE:
n stands for A (channel A) or B (channel B).
5.2 Device Independent Commands
*CAL?
Calibration Query
Syntax: *CAL?
Parameters: None
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com