ix
Safety Symbols and Terms
The following safety terms are used in this manual:
The WARNING heading in this manual explains dangers that could result in
personal injury or death.
The CAUTION heading in this manual explains hazards that could damage
the instrument.
In addition, a NOTES heading gives information to the user that may be
beneficial in the use of this instrument.
GENERAL WARNINGS AND CAUTIONS
The following general warnings and cautions are applicable to this
instrument:
WARNING
This instrument is intended for use by qualified personnel who recog-
nize shock hazards or laser hazards and are familiar with safety precau-
tions required to avoid possible injury. Read the instruction manual
thoroughly before using, to become familiar with the instrument’s
operations and capabilities.
WARNING
The American National Safety Institute (ANSI) states that a shock hazard
exists when probes or sensors are exposed to voltage levels greater then
42VDC or 42V peak AC. Do not exceed 42V between any portion of the
Model 2835-C (or any attached detector or probe) and earth ground or a
shock hazard will result.
CAUTION
There are no user serviceable parts inside the Model 2835-C. Work
performed by persons not authorized by Newport may void the war-
ranty. For instructions on obtaining warranty repair or service please
refer to Section 5 of this manual.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
Need help?
General
