Newport 2835-C - Table 7. Menu Level Key Functions and Parameters

15
iv. Use the , keys to move up or down through a menu list on a given
level. Also use these keys to adjust a parameter or decimal value when in
edit mode.
v. Use the , keys to select the digit being adjusted when in edit mode.
Table 7 – Menu Level Key Functions and Parameters
Top Level Second Level Third Level
DATA STORE <- -> DATA STORE OFF <- -> DATA STORE ON, OFF
CLR DATA BUFFER
(or DATA BUFFER CLR)
SLIDE BUFFER <- -> SLIDE, FIX BUFFER
D_BUF SIZE dddd <- -> D_BUF_SIZE dddd
VIEW DATA <- -> dddd OF dddd
SAVE CONFIG <- -> SAVE TO d
RECALL CONFIG <- -> RCL DEFAULT, d
ATTENUATOR <- -> ATTN ON, OFF
AUTO CAL
DET SWITCH POS <- -> SWITCH POS S, I, L
USER CALIB <- -> USR CAL OFF <- -> USR CAL ON, OFF
USR RESP <- -> d.dddE ± d A/W
†
PRESENT RESP <- -> d.dddE±d A/W
†
DC SAMPLING <- -> SAMPLE PREC <- -> PREC= 20000, 4096
CNT
SAMPLE FREQ <- -> FREQ = ddd.ddd HZ
TRIGGER OUT <- -> TRIG ON CMPLT <- -> TRIG ON CMPLT,
TRIG AT FREQ ,
TRIG ON LEVEL,
TRIG ON INTG,
TRIG OUT OFF
TRIG POLARITY <- -> TRIG ACTIVE LO, HI
TRIGGER FREQ <- -> FREQ= dddd.ddd H Z
TRIGGER LEVEL <- -> LVL= ± d.ddd E ± dd W
TRIGGER INTG <- -> INTG= ± d.ddd E ± dd J
EXT TRIGGER IN <- -> FALLING , RISING EDGE
BAR GRAPH ON <- -> BAR GRAPH ON, OFF
TONE OFF <- -> TONE ON, OFF
REMOTE SETUP <- -> GPIB ADDR dd <- -> GPIB ADDR dd
BAUD RATE 9600 <- -> BAUD RATE 1200,
2400, 4800, 9600, 19.2K
RS-232 ECHO OFF <- -> RS-232 ECHO ON, OFF
GENERAL INFO <- -> MODEL 2835-C
SW VERSION d.d
DETECTOR INFO <- -> MODEL xxxxxx
DET SN ddddd
ATTN SN ddddd
CAL ddMONyyyy
†
Units may be in A/W, V/W or V/J.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com