4
Section 2
System Operation
2.1 Introduction
The Model 2835-C is designed to provide quick operation and to avoid a steep
learning curve. This section starts by giving a brief listing of display, key pad
and menu command features. Much of the Model 2835-C’s operation will be
obvious after these descriptions. The manual then explains each key opera-
tion and menu command in detail. Reference each of these detailed explana-
tions as required when getting started.
2.2 Display
The Model 2835-C incorporates a vacuum fluorescent display, VFD, which can
be clearly observed with most laser goggles and at high angles of incidence.
Figure 2 illustrates and identifies the primary regions and annunciators within
the Model 2835-C’s display.
PULSECONTSNGLDC INTGMODE: % P-P
MENU EDITSHIFT STORE USR CAL EXT ATTN ZERO
AUTO
FILTER: ANLG + DIG
DISP: CHA CHB
Figure 2a – Model 2835-C VFD Display
Measurement Display Area
Units Display
SHIFT MENU EDIT STORE USRCAL EXT ATTN ZERO AUTO
Bar Graph, Menu and Message Display Area
MODE: FLTR:
= P-P DC INTG SNGL CONT PULSE
Measurement
Activity
Annunciator
Measurement
Mode
Annunciators
Signal Filtering
Annunciators
DISP:
Status
Annunciators
Display Channel
Annunciators
= ANLG + DIG
= CHA + CHB
Figure 2b – Description of Model 2835-C Display Regions
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
