62
DISP?
Display Brightness Query
Syntax: DISP?
Parameters: None
Function:
This query returns the brightness level of the display.
Returns: <level>
<level> is of type <number> where 0 corresponds to off, 1 to dim, 2 to normal,
and 3 to bright.
Related Commands: DISP
DISPCH
Display Channel Select
Syntax: DISPCH <channel>
Parameters:
<channel> is of type <string> in a double quoted format.
The possible values of <channel> are “A” for channel A and “B” for channel B.
Function:
This command is used to select the display channel of the meter. If the
requested channel is not available then this command will cause an error.
Returns: None
Related Commands: CH?, DISPCH?
DISPCH?
Display Channel Query
Syntax: DISPCH?
Parameters: None
Function:
This command is used to see which channel is currently selected as the
display channel.
Returns: <channel>
<channel> is of type <string> in a double quoted format. The possible values of
<channel> are “A” for channel A and “B” for channel B.
Related Commands: CH?, DISPCH
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
