80
STMXMN_n?
Statistics Buffer Max-Min Query
Syntax: STMXMN_n?
where n is either A or B
Parameters: None
Function:
This query returns the difference between the maximum and minimum
readings in the statistics buffer of the specified channel.
Returns: <mxmn>
<mxmn> is of type <number> in exponent notation.
Related Commands: STMAX_n?, STMEAN_n?, STMIN_n?, STMXMN_n,
STSIZE_n, STSIZE_n?
STSDEV_n?
Statistics Buffer Standard Deviation Query
Syntax: STSDEV_n?
where n is either A or B
Parameters: None
Function:
This query returns the standard deviation of the readings in the statistics
buffer of the specified channel.
Returns: <stddev>
<stddev> is of type <number> in exponent notation.
Related Commands: STMAX_n?, STMEAN_n?, STMIN_n?, STMXMN_n,
STSIZE_n, STSIZE_n?
STSIZE_n
Statistics Buffer Size Select
Syntax: STSIZE_n <size>
where n is either A or B
Parameters:
The parameter <size> is of type <number> which rounds to an integer in the
range of 0 to 100. The parameter represents the size of the statistics buffer.
Function:
This command sets the size of the buffer used for calculating real-time statis-
tics. The contents of this buffer are updated every time a reading is taken.
The statistics buffer is cleared automatically when this command is issued or
when the acquisition mode or units are changed. If the buffer size is set to 0
then the statistics are disabled and no statistical information will be main-
tained.
Related Commands: STMAX_n?, STMEAN_n?, STMIN_n, STSIZE_n?,
STSDEV_n?
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
