Newport NewStep NSA12 - Page 62

62 Command Set
SA set controller address
USAGE
IMM
♦
MIP
♦
SYNTAX
xxSAnn
PARAMETERS
Description xx
[ int ]
-
Controller number, current
nn
[ int ] - Controller number, new
Range xx
-
0 to 255
nn
-
0 to 255
Units xx
- None
nn
- None
Defaults xx
missing: none
out of range: none
nn
missing: error 38, Parameter missing
out of range: error 7, Parameter out of range
DESCRIPTION
This command sets the Controller number.
RETURNS This command has no return value.
REL.
COMMANDS
none
EXAMPLE
0SA14
|
Sets the Controller number from 0 to 14