64 Command Set
SM save settings to non-volatile memory
USAGE
IMM
♦
MIP
SYNTAX
xxSM
PARAMETERS
Description
xx
[ int ]
-
Controller Number
Range
xx
-
0 to 255
Units
xx
- None
Defaults
xx
missing: none
out of range: none
DESCRIPTION
This command is used to save controller configuration settings
from RAM to non-volatile EEROM memory. It should be used
after modifying parameters and settings to assure that the new
data will not be lost when the controller is powered off.
RETURNS
This command has no return value.
REL.
COMMANDS
none
EXAMPLE
61SM
| save changes for controller 61 to non-
volatile memory
To Next Page
Loading...
