Newton S - Drawings and Dimensions; Connectors

NEWTON S 31
SYSTEM OPERATION MANUAL
A.1.2 DRAWINGS AND DIMENSIONS
Ø 120 mm
Ø 111,10 mm
60 mm
mm 06
Ø 136,50 mm
sunken area 1 mm deep
4x UNC 3/8" - 16 (11mm deep)
8x M6 (6.5mm deep)
Figure A.1: Mounting hole pattern
A.1.3 CONNECTORS
The 3G-SDI, HD-SDI and the 8P8C/RJ45 passthrough connector provides a one-to-one connection
between the pan-box and cradle.
The IA-CAN connector is proprietary to Newton Nordic equipment.
Pan-box Power In
Mating connector: LEMO EGJ.2B.304
Acceptable voltage: 12V – 36V
1
23
4
Figure A.2: Power in
Table A.5: Power in, pins
Pin number Description
1,2 Positive (+)
3,4 Negative (-)
DO NOT DISTRIBUTE
Copyright © 2019 Newton Nordic AB