NexComm Systems NEXPEED NBG440 User Manual

NEXPEED NBG440 User’s Manual
NexComm Systems, Inc. 52 PAGE
Rebooting the system
Unplugging and subsequent plugging of the power source adapter for NBG440 triggers a reboot of
the system hardware. The following command is available to perform a software-wise reboot of
the system.
COMMAND (conf)# reboot flash
Note: Before rebooting the system, you must save current configuration to Flash memory.
Otherwise, the system may lose the running configuration when rebooting the system.
The router configures the system based on the configuration values saved in Flash
memory.

NexComm Systems NEXPEED NBG440 Specifications

General

Brand	NexComm Systems
Model	NEXPEED NBG440
Category	Network Router
Language	English