Nexo GEO M10

TECHNICAL SPECIFICATIONS Page 63/79
8.2 GEO M1012 & GEO M1025
8.2.1 System specifications
GEO M1012
(without CDD
TM
)
GEO M1012
(with CDD
TM
)
GEO M1025
(without CDD
TM
)
GEO M1025
(with CDD
TM
)
GEO M10 WITH NEXO TDCONTROLLER SETUP
Frequency Response @-6 dB
59 Hz to 20 kHz
Sensitivity 1W@1m
100 dB SPL Nominal
Peak SPL@1m
131 dB
Vertical Dispersion
12°
25°
Horizontal Dispersion
80°
120°
80°
120°
Passive Crossover Frequency
1.3 kHz
Nominal Impedance
8 Ohms
Recommended Power
750 Watts
PRODUCT FEATURES
LF Component
1 x 10' 8 Ohms long excursion Neodymium driver with PDDTM
HF Component
1 x 1.4' throat driver on a BEA/FEA optimized HR Wavesource™
Height x Width x Depth
288mm x 531mm x 355 mm (11.3' x 20.9' x14.0")
Weight: Net
21 kg (47 lbs)
Connectors (Touring version)
2 x NL4, 4 poles connectors (1+/1- Through, 2+/2- GEO M10)
Connectors (Install version)
2 x Cable gland with 2 cores cables
Construction
Lightweight Polyurethane Composite
Fittings
4 x Side handles (2 vertical + 2 horizontal) + back grip
Front Finish (Touring version)
Steel front grill + back mesh
Front Finish (Install version)
Acoustic fabric fitted from grill
Operating temperature range
0°C - 40 °C (32° F - 104° F)
Storage temperature range
-20 °C - 60 °C (-4 ° F - 140° F)
SYSTEM OPERATION
Recommended powering solution
NXAMP4x4 Powered TDcontroller: up to 4 x GEO M10 per channel
Optional powering solution
NXAMP4x1 Powered TDcontroller: 1 x GEO M10 per channel
NXAMP4x1 Powered TDcontroller (Bridged): up to 2 x GEO M10 per channel
DTD TDcontroller + DTDAMP4x1.3 Power amplifier: up to 2 x GEO M10 per
channel
8.2.2 Dimensions (mm/inches)