Nexo Geo M620

Page 46/62 TECHNICAL SPECIFICATIONS
11.3 GEO M6Bass Module
System specifications 11.3.1
SYSTEM SPECIFICATIONS
GeoM6Bass with NEXO controller setup
Frequency Response
75 Hz - 120 Hz ±3dB
Usable Range @-6dB
70Hz - 120 Hz
Sensitivity 1W @ 1m
94 dB SPL Nominal
Nominal Peak SPL @ 1m
125 dB
Nominal Impedance
8
Recommended Amplifiers
450W per box (3 boxes max in parallel on one channel amplifier)
PRODUCT FEATURES
GeoM6Bass
Components : LF
LF: 1x 6,5", 8 ohms long excursion driver
Height x Width x Depth
191 x 373 x 260 mm
Weight : Net
7.6 kg
Connectors
2 x NL4 Speakon 4 pole
Construction
Lightweight Polyurethane composite
Fittings: Handles
Side “Geo” Handle
Front finish
Acoustic Fabric fitted front grill
SYSTEM OPERATION
Electronic Controller
The NEXO controller’s presets are precisely matched to the GeoM Series cabinets and include sophisticated protection.
Using GeoM Series cabinets without a properly connected NEXO controllers will result in poor sound quality and can
damage components.
Speaker Cabling
1+/1-
As part of a policy of continual improvement, NEXO reserves the right to change specifications without notice.