Nexo PS Series User Manual

Page 44/82 PS SERIES HARDWARE SETUP PROCEDURE
Truss suspension
 Connect truss hook VNT-TCBRK to “U” bracket by inserting 8x45 quick release pin in dedicated
holes;
 Ensure truss hook is properly locked to “U” bracket;
 Lift and position assembly, lock hook on truss suspension point and secure with hook cable.
PS SERIES HORIZONTAL SUSPENSION PROCEDURE
Unlocking the “u” bracket safety locker
 Lift the metal plate located at the corner of the bracket and unfold the side bar
UNLOCKING „U“ BRACKET SAFETY LOCKER

Nexo PS Series Specifications

General

Brand	Nexo
Model	PS Series
Category	Controller
Language	English