6 | ni.com | NI USB-6000 User Guide
Using the NI USB-6000 in an Application
You can use the DAQ Assistant through many NI application software programs to configure
virtual and measurement channels. Table 1 lists DAQ Assistant tutorial locations for NI
applications.
Refer to the Where to Go from Here section for information about programming examples for
NI-DAQmx.
Table 1. DAQ Assistant Tutorial Locations
NI Application
Software
Tutorial Location
LabVIEW Go to Help»LabVIEW Help. Next, go to Getting Started with
LabVIEW»Getting Started with DAQ»Taking an NI-DAQmx
Measurement in LabVIEW.
LabWindows
™
/CVI
™
Go to Help»Contents. Next, go to Using LabWindows/CVI»
Data Acquisition»Taking an NI-DAQmx Measurement in
LabWindows/CVI.
Measurement Studio Go to NI Measurement Studio Help»NI Measurement Studio
Help. Next, go to Developing Projects with Measurement
Studio»Getting Started with the Measurement Studio Class
Libraries»Measurement Studio Walkthroughs»
Walkthrough: Creating a Measurement Studio NI-DAQmx
Application.
SignalExpress Go to Help»Taking an NI-DAQmx Measurement in
SignalExpress.