Nibe AG-WL10 series - 4 Electrical Connection; General; Connecting Indoor and Outdoor Unit

General
Electrical installation and service must be carried out
under the supervision of a qualified electrician.
Cut the current with the circuit breaker before carrying
out any servicing. Electrical installation and wiring must
be carried out in accordance with the stipulations in
force.
Caution
The appearance of the terminals can vary
between different outdoor units.
Also see the installer handbook for the outdoor
unit.
Connecting indoor and outdoor
unit
Rated voltage
230V ~ 50Hz
Indoor unit Outdoor unit
A
C
B
Explanation
Power supply cableA
Communication cable
1
B
Connection cableC
1
The communication cable must always be screened.
AG-WL10Chapter 4 | Electrical connection8
4 Electrical connection