Supplied components
Room sensorOutside sensor
Current sensorEarth cabling (4 pcs)
Location
The kit of supplied items is placed on top of the product.
Removing the covers
Front cover
1.
Remove the upper panel by pulling it straight out.
2.
Remove the screws from the lower edge of the front
panel.
3.
Lift the panel out at the bottom edge and up.
4.
Pull the panel towards yourself.
Side covers
The side covers can be removed to facilitate the installa-
tion.
1.
Remove the screws from the upper and lower edges.
2.
Twist the cover slightly outward.
3.
Move the hatch backwards and slightly to the side.
4.
Pull the cover to one side.
5.
Pull the hatch forwards.
Removing parts of the
insulation
Parts of the insulation can be removed to facilitate the
installation.
Grip the handle and pull straight out as illustrated.
13Chapter 2 | Delivery and handlingNIBE F470
To Next Page
Loading...
Need help?
General
