Nice Apollo 1500 - 1 - OVERVIEW; EXTREMELY IMPORTANT; Technical Specifications; 2 - GATE INFORMATION

EXTREMELY IMPORTANT 2
TECHNICAL SPECIFICATIONS 2
1 - OVERVIEW 2
2 - GATE INFORMATION 2
2.1 - ASTM F2200 2
2.2 - Gate latches 3
2.3 - Specic applications 3
2.4 - Swing gates 3
2.5 - General requirements 3
3 - SAFETY AND CAUTIONS 3
3.1 - Properly installed safety devices 3
3.2 - Safety signs, notices to personnel warning signs 3
3.3 - Gate system safety devices 4
3.4 - Infrared beams and warning signs 4
3.5 - Establish the location 4
3.6 - Read and follow all instructions 4
3.7 - Keep children away 4
3.8 - Test the gate system 4
3.9 - Keep gates properly maintained 4
4 - INSTALLATION NOTES 5
5 - APPLICATIONS 7
6 - SOLAR PANEL CHART 7
7 - PARTS IDENTIFICATION 8
8 - PULL TO OPEN INSTALLATION 9
8.1 - Location of pivot point 9
8.2 - Vertical position of pivot arm 9
9 - PUSH TO OPEN INSTALLATION 10
9.1 - Location of pivot point 10
9.2 - Vertical position of pivot arm 10
9.3 - Wiring Actuators for push to open 10
10 - ACTUATOR MOUNTING 11
11 - CONTROL BOX MOUNTING 11
12 - CONNECTING ACTUATORS 11
13 - GATE BRACKET MOUNTING 12
14 - LIMIT SWITCH ADJUSTMENT 12
14.1 - Model 1500 12
14.2 - Model 1600 12
15 - CONTROL BOARD CONNECTIONS 13
16 - CONTROL BOARD ADJUSTMENTS 14
17 - NICE RECEIVERS & TRANSMITTERS 15
17.1 - Wiring the Nice receiver 15
17.2 - Programming transmitters 15
18 - GENERAL LAYOUT & SAFETY ACCESS 16
20 - MAINTENANCE SCHEDULE 18
21 - TROUBLESHOOTING 17
22 - OPERATOR DIMENSIONS
22.1 - Control box 18
22.2 - Actuator 19
23 - EXPLODED VIEWS
23.1 - 1500 Single gate control box 20
23.2 - 1600 Dual gate control box 21
23.3 - Actuator front 22
23.4 - Actuator back 23
24 - WARRANTY INFORMATION 24
25 - INSTALLATION CHECKLIST 25
TABLE OF CONTENTS