The C2 Pro is a presence and access controller that features a high efficiency 1GHz Dual-
Core processor, maintaining high performance while reading the fingerprint in less than 0.5
second.
It supports RFID readers and has RS485, wiegand, PoE (Power over Ethernet)
communication - TCP/ IP or WiFi.
Based on the Linux operating system, C2 Pro provides SDK for integration with software.
It also has one dry contact output (relay) and one connection for access control system.
CPU: Dual Core 1GHz Processor
Memory: DDR3512M + Flash 2GB
LCD: 3.5” TFT
LED: three colours for light indicator
Enrollment
and validation
Verify mode: Fingerprint (1:N, 1:1), Password, Card
Fingerprint capacity: 10.000 (1:N)
Logs: 100.000
TCP/IP: Yes
RS-485: Yes
Relay: 1 Relay
USB: 1 Host
12VDC 1A / PoE IEEE802.3af/at
140(L) x 190(A) x 32(P) mm
Items included at the package:
- Device C2Pro
- Instruction manual
- Connector cable of extension function
- Screws
To Next Page
Loading...
Need help?
General