c) Group
It’s configured during the enrollment of the user and it’s linked to the time zone, restricting
the access of the user during the period and the hour programmed.
NOTE: This configuration is made individually for the users.
d) RemoteVerify
Remote verify, it’s divide between the options Client Network, Server Network and RS485.
The options Server and RS485 can be configured to work as only remote verify (only check
if the fingerprint is enrolled at the data base to grant the access) as antiback (being the
equipment configurated as entry or exit, depending from another C2 Pro or a software to
grant the access, otherwise, there’s no access again). This function still been implemented.
Contact the technical support for more information.
e) Print
To Next Page
Loading...